How to water a tree so that it dies. Chemical ways to remove a tree

A tree is a beautiful component of landscape design and an important part of the development of all life on our planet. Therefore, sometimes it is very difficult to make a decision to remove it, but if it has already been made, let's figure out how to get rid of the trees on the site in the best possible way.

Using chemicals to kill a tree

If you decide to resort to using chemicals to dry the tree, then you should choose the best tool for this. Most often, chemicals have their effect on the root system of the plant. Before you water the root of a tree so that it dries out, you need to know the composition of the soil under it. Sometimes, instead of roots, chemicals are applied to the bark of a tree or its living tissues.

If possible, you can cut down the trunk of the tree, and then use chemicals to destroy the stump. This way you can get rid of unwanted trees on your site even faster. Let's look at what chemicals can be used to dry a tree:

Sometimes it is applied directly to the soil or to a tree trunk. More fast effect can be obtained by introducing saltpeter into the hollow of a tree: in a year the tree will dry up and can be burned. Watering the soil will give an effect only after a few years.
Ammonium nitrate is similar in its action to sodium, but it also has a difference. Such urea-based saltpeter accelerates the process of decomposition of wood, and then the roots of the tree turn into fertilizer. In this case, the trunk with the signs of drying that have appeared can be uprooted, and the opened roots can be poured again with a solution of ammonium nitrate.
Herbicides "Roundup" or "Tornado" are most often used to destroy unwanted trees. These funds are used for the deconstruction of low-value young plantings, and also, if necessary, to remove the stand in coniferous plantations. Preparations "Arsenal" and "Arbonal" have a high ability to penetrate into wood, they are used for thinning vast forests, as well as in nurseries and other agricultural plantations.
"Pikloram" is effective both when watering the soil and when spraying the tree itself. This drug acts depressingly on the root system, which leads to the drying of the entire plant.

Features of chemical tree removal

Using the method of chemical exposure, it must be remembered that several important features are taken into account during its implementation.

The tree has the ability to protect damaged areas, that is, "cork" them. This means that a protective layer can form around tissues exposed to herbicides, which will impair the absorption of the drug and reduce its effectiveness. So if you want to remove a tree by applying Chemical substance on its living tissues, do it immediately after the nicks. As a result, the chemical preparation is absorbed as quickly and fully as possible.
In some cases, trees belonging to the same species and growing next to each other grow roots together. Accordingly, if you apply the herbicide to one of them, the second will also receive its dose of the drug and will either be damaged or destroyed.
There is a danger that the tree being removed will release the herbicide in environment and the rest of the plants will absorb it.
To improve the accuracy of exposure, dyes are often added to the preparation. Thus, it is possible to control which tree has already been processed and which one is yet to be destroyed.

In addition, it should be understood that the removal of trees is possible in other ways, without resorting to chemicals. This includes felling a whole tree, and sawing it in parts, and work on an aerial platform. In more detail about the variety of methods for removing green spaces, you will be told in any organization professionally engaged in arboristry.

What should be considered when using chemicals?

Application chemicals inevitably requires compliance with safety precautions, as well as rules of use. One of the main problems with this approach to the destruction of woody vegetation is the detrimental effect on the soil. Specialized drugs are usually spared from side effects in the form of a deterioration in the fertility of the earth, but this aspect should still be taken into account when choosing which solution to water the tree so that it dries along with the roots.

Purposeful treatment of one tree, even under the maximum conditions for limiting the action of the drug, can lead to the death of other plants. This is due to the fact that trees can grow together with roots, forming a single vascular network. Thus, if one specimen is poisoned, then the “related” tree will soon die. It is almost impossible to calculate such a probability, especially if a dense landing prevails on the site. You can insure yourself only by careful choice: how to water the tree so that it dries out without affecting other plants. In this regard, it is important to take into account that trees of not only one variety, but also of a genus, are subject to fusion.

Tips to Remember When Destroying Trees

It should be remembered that when using chemicals to destroy trees, the person conducting the work is responsible for the effect produced.
Trees are able to "cork" damaged areas and naturally protect myself. "Corking" is that the tree is able to form a protective layer around damaged tissue. This layer can reduce the absorption of herbicides and reduce the effectiveness of the drug.
It should be remembered that trees can have one common vascular system, as a result of root fusion. As a rule, the fusion of roots occurs in trees of the same species, but it happens that the roots grow together in trees of the same genus.

Thus, a herbicide can be carried from one tree that threatens another tree that should not be eradicated by damaging or destroying it.

It is important to remember that once the herbicide has been released from the tree, it can be taken up by other plants. Serious consequences can be that the destroyed tree releases a substance into the environment, which is absorbed by nearby plants and can damage them.
It should be remembered that the addition of dyes to the herbicide increases the accuracy of processing. Trees processed this way are easier to track and are less likely to be missed or re-processed.
It should be remembered that herbicide application instructions often warn against spreading directly under the bark of a tree. But the roots of a tree often grow outside the area directly under the crown of the tree.

You can use the rule of thumb that on the east side, the roots of the tree extend a distance equal to the height of the crown of the tree, and on the western side, half this distance.

Every gardener strives to create best conditions for the trees growing in his area. And, nevertheless, there are situations when the owner has a question: how can I water the tree so that it dries quickly? To some, this method seems inhumane, but sometimes there is simply no other way out.

For example, it may happen that the tree is already old, its trunk is over 30 cm in diameter, but it is not possible to cut and dump it due to the fact that there are buildings in the immediate vicinity or all the space around is occupied by other plants. And then there is only one thing left - to dry the tree with the help of chemicals.

Using chemicals to kill a tree

Sodium nitrate is most often applied to stumps. However, sometimes it is also applied directly to the soil or to a tree trunk. A faster effect can be obtained if saltpeter is introduced into the hollow of a tree: in a year the tree will dry up and can be burned. Watering the soil will give an effect only after a few years.
Ammonium nitrate similar in its action to sodium, but it also has a difference. Such urea-based saltpeter accelerates the process of decomposition of wood, and then the roots of the tree turn into fertilizer. In this case, the trunk with the signs of drying that have appeared can be uprooted, and the opened roots can be poured again with a solution of ammonium nitrate.

Herbicides "Roundup" or "Tornado" are most often used to destroy unwanted trees. These funds are used for the deconstruction of low-value young plantings, and also, if necessary, to remove the stand in coniferous plantations. Preparations "Arsenal" and "Arbonal" have a high ability to penetrate into wood, they are used for thinning vast forests, as well as in nurseries and other agricultural plantations.
"Pikloram" is effective both when watering the soil and when spraying the tree itself. This drug acts depressingly on the root system, which leads to the drying of the entire plant.

Using chemicals to kill a tree

Sometimes it is applied directly to the soil or to a tree trunk. A faster effect can be obtained if saltpeter is introduced into the hollow of a tree: in a year the tree will dry up and can be burned. Watering the soil will give an effect only after a few years.
Ammonium nitrate is similar in its action to sodium, but it also has a difference. Such urea-based saltpeter accelerates the process of decomposition of wood, and then the roots of the tree turn into fertilizer. In this case, the trunk with the signs of drying that have appeared can be uprooted, and the opened roots can be poured again with a solution of ammonium nitrate.
Herbicides "Roundup" or "Tornado" are most often used to destroy unwanted trees. These funds are used for the deconstruction of low-value young plantings, and also, if necessary, to remove the stand in coniferous plantations. Preparations "Arsenal" and "Arbonal" have a high ability to penetrate into wood, they are used for thinning vast forests, as well as in nurseries and other agricultural plantations.
"Pikloram" is effective both when watering the soil and when spraying the tree itself. This drug acts depressingly on the root system, which leads to the drying of the entire plant.

Features of chemical tree removal

Using the method of chemical exposure, it must be remembered that several important features are taken into account during its implementation.

The tree has the ability to protect damaged areas, that is, "cork" them. This means that a protective layer can form around tissues exposed to herbicides, which will impair the absorption of the drug and reduce its effectiveness. So if you want to remove a tree by applying a chemical to its living tissue, do it right after the nicks. As a result, the chemical preparation is absorbed as quickly and fully as possible.
In some cases, trees belonging to the same species and growing next to each other grow roots together. Accordingly, if you apply the herbicide to one of them, the second will also receive its dose of the drug and will either be damaged or destroyed.
There is a danger that the tree being removed will release the herbicide into the environment and other plants will absorb it.
To improve the accuracy of exposure, dyes are often added to the preparation. Thus, it is possible to control which tree has already been processed and which one is yet to be destroyed.

In addition, it should be understood that the removal of trees is possible in other ways, without resorting to chemical preparations. This includes felling a whole tree, and sawing it in parts, and work on an aerial platform. In more detail about the variety of methods for removing green spaces, you will be told in any organization professionally engaged in arboristry.

What should be considered when using chemicals?

The use of chemicals inevitably requires compliance with safety precautions, as well as rules for use. One of the main problems with this approach to the destruction of woody vegetation is the detrimental effect on the soil. Specialized preparations, as a rule, are free from side effects in the form of a deterioration in soil fertility, but this aspect should still be taken into account when choosing which solution to water the tree so that it dries along with the roots.

It should be remembered that when using chemicals to destroy trees, the person conducting the work is responsible for the effect produced.
Trees are able to “cork” damaged areas and naturally protect themselves. "Corking" is that the tree is able to form a protective layer around damaged tissues. This layer can reduce the absorption of herbicides and reduce the effectiveness of the drug.
It should be remembered that trees can have one common vascular system, as a result of root fusion. As a rule, the fusion of roots occurs in trees of the same species, but it happens that the roots grow together in trees of the same genus.

Thus, a herbicide can be carried from one tree that threatens another tree that should not be eradicated by damaging or destroying it.

Hello dear subscribers and readers of Andrey Noak's Blog! Recently, a neighbor came to me, complaining that a large objectionable tree is growing in his garden. He asked how to properly get rid of it and at the same time quickly dry it. I gave him some advice for the future, and also decided to share with you. Here are good examples of how to dry a tree correctly.

The humidity of a growing tree depends on the time of year: in early spring, the humidity is the highest, but in winter, on the contrary, it is minimal. If you harvest wood when it has a low moisture content, then it will be more resistant, it will crack less when dried. The more the material dries, the more and deeper it is. "Soft" wood dries out less, but faster than hardwoods.

There are three groups of rocks (according to the degree of shrinkage):

Strongly drying out: birch, apple tree, larch, maple;
Medium: aspen, elm, oak, ash, linden;
Small degree (often coniferous): cedar, spruce, pine, poplar, willow.

Any breed, except for aspen, is ideally harvested in late autumn or early winter, then the amount of juice is the lowest and you just have to dry it on your site.

Drying methods

There are many ways to dry, depending on various conditions.

"On the Root". Spend from spring to late summer. To begin with, a wide ring of bark is removed from the trunk of the tree, closer to the root. Due to the cessation of the flow of moisture into the crown, the tree gradually dries. It is important that the foliage is preserved on the tree, as it intensively feeds on the remaining moisture. After felling, the trunk is sawn and dried.
A similar method, but already on a fallen tree. Part (2/3) of such a trunk must be completely cleared of bark. Branches and leaves should remain in place, as should the top of the crown. The leaves imperceptibly quickly “pull” the moisture out of the trunk and after 2-3 weeks it can be sawn into ridges. After processing, it is worth drying under a canopy. In the open air, the tree dries for a very long time: from several months to a year or more.
To dry the lumber under a canopy, the boards are stacked in piles on a flat base. This provides protection from direct sunlight and rain. The base consists of bars, thick rails or pipes, so that the distance of the lower layer of material from the ground is at least 30 cm. Damp ground can be covered with old pieces of roofing material, as an option, straw, shavings, hay are suitable. The base beams must create a single plane and not deform under the influence of the load.

The ends of the material (round timber or) are smeared with a solution of lime, wood glue and any paint or drying oil (creamy mass). Between the layers of wood, be sure to lay gaskets at a distance of one meter from each other. The most extreme are flush with the ends of the boards. On the sides, the stack is covered from blowing and oblique rain.

Covering the ends of thick lumber to prevent rapid release of moisture and the formation of cracks during drying...

If you need to dry a ridge of soft rock, then the bark should not be removed from it, it is better to make transverse notches. In the future, the bark will keep the tree from cracking. Sometimes the churak is completely sanded, leaving 15-20 cm of unremoved bark at the ends.

Other interesting ways

To “pull out” excess moisture from the workpiece, you can boil it in fresh water. High temperature releases moisture from the inner layers of wood and gives elasticity. Raw hot logs are very easy to process. You can dry these products at room temperature. Salt water is also used for this method, where the salt prevents the material from rotting.

There is a digestion in oil or drying oil. For this method, natural drying oil, cottonseed or linseed oil are suitable; when boiled, they will displace moisture and fill the free intercellular space. After that, the material is dried at room temperature. Such wood is easily sanded and does not absorb moisture, while gaining an original shade.

Drying on concrete is rarely used, but due to the absorbent properties of the solution, it is no less effective. To do this, raw wood must be placed on clean and dry concrete. The blanks need to be turned from time to time to the floor in different directions.

To date, you can find drying with the use of chemicals. But after it, the wood is difficult to process.

If you know the structure well and, then you can use an ax, saw and drill to direct the drying process in the right direction.

More useful information can be obtained by reading my useful little book. More details about it in the section "MY BOOKS".

Andrey Noak was with you, good luck and see you soon!

Tree removal video

Situations on suburban area are very different. Sometimes removing a tree becomes the only way out. And here there is a choice of several methods of destruction. For example, a list of chemicals has been developed that can be used to remove green spaces quickly and without harming their environment.

Effective ways to remove trees

The basis of all chemical methods is the penetration of preparations consisting of herbicides into specific areas of the tree. Due to the point effect of such agents, the risk of their influence on neighboring vegetation, which occurs during the natural transport of nutrients by the roots, is reduced. There are four in total effective ways how to remove a tree chemically.

Impact on living wood

Since herbicides cannot penetrate the vascular tissues due to the bark of the tree, several downward cuts are made on the trunk. To do this, use an ax, making notches around the circumference of the tree and not tearing off the bark. The herbicide is then applied to these notches. The technique of applying a chemical is external and injection. In the second case, injections are made directly into the incisions, keeping a distance of 5-10 centimeters between them. Injections are well suited for the destruction of trees with a diameter of more than 5 centimeters. To maximize the effectiveness of the drug, the living wood method is used before or after the period of sap flow. The juice flowing from the incisions will prevent the drug from being absorbed.

Applying herbicide to bark

In order to remove a tree of any size and species, the method of chemical attack on the bark is often used. The herbicide is applied to an area of bark located 50 centimeters from ground level. First, the chemical is mixed with oil and covered with it on the bark until it completely absorbs it. This method refers to universal and is used both in the period from spring to autumn, and in winter.

tree foliage processing

Shrubs with a branch height of up to four meters are most often destroyed by applying the drug to their foliage. There is no need to impregnate the tree trunk with herbicide. It is best to treat the green space in early spring and up to September, but avoid hot, dry weather. At this time, the trees are under stress due to lack of water, and the effect of herbicides on the foliage is noticeably worse.

Chemical treatment in the ground

When it becomes necessary to remove big number trees, use the features of the soil after abundant watering. Being highly moistened, the topsoil accelerates the penetration of chemicals to the root system of the tree. As a result, specific trees can be destroyed. To do this, the herbicide is applied to the soil surface and concrete barriers are installed, concentrating the substance in one place.

Also, chemical removal is practiced to destroy the stump left after the mechanical felling of the tree. In this situation, the drug is applied either to the cut surface at a stump less than 10 centimeters in diameter, or to the outer edge for larger tree remains.

Features of chemical tree removal

Using the method of chemical exposure, it must be remembered that several important features are taken into account during its implementation.

The tree has the ability to protect damaged areas, that is, "cork" them. This means that a protective layer can form around tissues exposed to herbicides, which will impair the absorption of the drug and reduce its effectiveness. So if you want to remove a tree by applying a chemical to its living tissue, do it right after the nicks. As a result, the chemical preparation is absorbed as quickly and fully as possible.
In some cases, trees belonging to the same species and growing next to each other grow roots together. Accordingly, if you apply the herbicide to one of them, the second will also receive its dose of the drug and will either be damaged or destroyed.
There is a danger that the tree being removed will release the herbicide into the environment and other plants will absorb it.
To improve the accuracy of exposure, dyes are often added to the preparation. Thus, you can control which tree has already been processed, and which one is yet to be destroyed.

In addition, it should be understood that tree removal possibly in other ways, without resorting to chemicals. This includes felling a whole tree, and sawing it in parts, and work on an aerial platform. In more detail about the variety of methods for removing green spaces, you will be told in any organization professionally engaged in arboristry.