10 liters to cubic meters. How to convert liters to cubic centimeters

Very often, buyers of tanks, reservoirs and other containers have the following questions:

1 cube is how many liters?
How many cubic cm (cubic centimeters), dm cube in a liter?
How many liters of gas, propane, earth, solution are in a cube?
How many liters in a cube of concrete, diesel fuel?
How many liters are in a cubic meter (cubic meter)?
How many liters of air are in a cube?

Next, you can select groups of questions that are more clarifying, for example, a tank of 50 liters, how many cubic meters? Or 500, 5000 3000, 200 liters - how many cubic meters is it. These questions are relevant when you need to buy a container for 50, 100, 200 liters - while manufacturers offer containers for 5, 10, 15 cubic meters. Let's figure out how to convert cubes to liters and vice versa. Whether such conversions between units of measurement depends on the substance that will be placed in the container.

Convert cubes to liters

First, a small digression to the school physics course. The generally accepted unit for measuring volume is the cubic meter. Represents 1 cube. m. - the volume of a cube, the side of which is equal to one meter. This unit is not always convenient, so others are often used - cubic centimeters, and cubic decimeters - liters.

In everyday life, the most convenient unit of measurement is a liter - the volume of a cube, the side of which is 10 cm or 1 dm. Thus, we obtain the following ratio: 1 liter = 1 dm3.

From here we get the following forms:

1 cu. m \u003d 1000 l (formula for the volume of a cube in liters)

0.5 cubic meters how many liters? Solution: 0.5*1000=500 liters. Answer: 500 liters.
10 cubic meters how many liters? Solution: 10*1000=10,000 liters. Answer: 10,000 liters.
How many liters is 2 cubes? Solution: 2*1000=2000 liters. The answer is 2,000 liters.
How many liters is 20 cubic meters? Solution: 20*1000=20,000 liters. The answer is 20,000 liters.
How many liters is 30 cubic meters? Answer: 30,000 liters.
300 cubic meters how many liters? Answer: 300,000 liters.
How many liters is 5 cubes? Answer: 5000 liters.
6 cubes - how many liters? Answer: 6000 liters.
4 cubes how many liters? The answer is 4,000 liters.

Accordingly, the simplest: The answer to the question: "How many liters is 1 cubic meter?" - 1000 liters.

How many liters in a cubic meter?

And now we will give answers to questions regarding the conversion of liters to cubic meters.

100 liters how many cubes? Solution: 100 * 0.001 \u003d 0.1 cu. meters. Answer: 0.1 cubic meters.
200 liters how many cubes? Solution: 200*0.001=0.2 cu. meters. Answer: 0.2 cubic meters
3000 liters how many cubes? The answer is 3 cu. meters.
500 liters how many cubes? Answer: 0.5 cubic meters.
5000 liters how many cubes? Answer: 5 cubes.
1000 liters how many cubes? Answer: 1 cubic meter.
10000 liters how many cubes? Answer: 10 cu. m.
How many cubic meters is 140 liters? Answer: 0.14 cubic meters.
1500 liters how many cubes? Answer: 1.5 cubic meters.

Volume indicates the amount of space that a substance fills. Capacity is a quantity closely related to volume. After all, it determines the capacity of the inner vessel where this substance is placed. This physical quantity (V) is measured in cubic meters, cubic centimeters or in cubic decimeters, the latter are equated to liters. Further, in detail, we will find out by what methods it is possible to convert m³ to liters.

For example, you installed a swimming pool, you know its volume in cubic meters (8 m³). Chlorine must be added to keep the water from blooming. But, unfortunately, to find out how much chlorine to add to the amount of water in your tank, you need to know the capacity of the tank. Since school it is known that 1 dm³ \u003d 1 liter. And one meter in a cube is equal to 1000 dm³, hence 1 m³ = 1000 liters. Now it is clear that V = 8 m³ corresponds to 8,000 liters. Not everyone understands why there are a thousand liters in a cubic meter, which in general is a cubic meter. Imagine a large cube with dimensions: height 1 meter, width 1 meter and length 1 meter. This cube holds a thousand liters of water, it has been experimentally tested. Almost everyone is familiar with the Rubik's cube, so according to the principle of this puzzle, we break our cube into equal small parts (size - 1 dm: 1 dm: 1 dm). These small cubes have a capacity of 1 liter. If you count them, you get 1,000 pieces in one cube. Do not get lost if the volume is indicated in decimal fractions. To translate, it is enough to multiply the value by a thousand. Consider an example: the volume of the aquarium is 0.2 m³, we need displacement. The calculation is simple: 0.2 m³ must be multiplied by 1,000, you get 200 liters. There is an aquarium calculator for calculating V of water by size. It is enough to measure the length, height, width of the aquarium or other container in cm, insert the values into the free fields, press the "Calculate volume" button, and get the result. Having access to the World Wide Web, you don’t even need to delve into the essence of the process, what are liters, cubic meters, decimeters, etc. Enter into the search engine: online volume unit calculator, choose the one you like. Next, insert the value in m³ into the desired window and select what you want to know liters. The converter will give an answer in a second. Perhaps, to solve the problem, the student will need a reverse conversion - liters to cubic meters. You just have to divide this value by 1000. Example:

15,000 liters to convert to cubic meters;
15,000 ÷ 1,000 = 15 m³

It is known from history that since 1964 a liter has been equated to 1 dm³. Prior to that, starting in 1901, one liter was equal to a kilogram, i.e. the weight of ordinary water at t = 3.9°C and at normal (760 mm) atmospheric pressure. The mass of water was 0.999972 kg.

As you can see, knowing the dimensions of the volume in cubic meters, you can calculate the displacement. Moreover, by different methods, now you know them. Know that liters are used to measure volumes of gas or liquid weighing from 100 grams to hundreds of kilograms. When V is greater than 1,000 litres, it is better to count in cubic meters. Yes, and in physics, when solving problems, m³ is mainly used.

Very often buyers of tanks, cisterns and other containers have the following questions:

1 cube - how many liters?
How many liters of cubes cm (cm centimeters), dm cubes?
How many liters of gas, propane, earth, solution in a cube?
How many liters of cement concrete, diesel fuel?
How many liters per cubic meter (cubic meter)?
How many liters of air are in a cube?

In addition, it is possible to single out groups of questions that determine, for example, a tank with a volume of 50 liters of cubes?

But 500, 5000 3000, 200 liters - how many cubic meters. These questions are important if you want to purchase a capacity of 50, 100, 200 liters, while manufacturers offer a capacity of 5, 10 15 cubes. We will understand how to convert cubes in liters and back. Depending on the substance to be transferred to the container, such a transfer between measured units.

First, a small digression into the course of physics.

The common unit of measurement for volume is known to be the cubic metre. It is 1 cu.

How to convert cubic meters per liter

m - the volume of the cube, which is at a distance of one meter. This device is not always convenient, so you often use others - cubic centimeters and cubic decimeters - a liter.

In everyday life, the unit of measurement of a liter is the most appropriate - the volume of a cube, which is 10 cm or 1 dm.

This gives the following ratio: 1 liter = 1 cubic dm.

Therefore, we get the following forms:

1 c.u.

m = 1000 l (cube formula in liters)

1 L = 0.001 cu. m

And then, armed with a calculator, we will find answers to some of the problems listed above.

How many liters is 0.5 cube? Solution: 0.5 * 1000 = 500 liters. Answer: 500 liters.
How many liters are 10 cubic meters? Solution: 10 * 1000 = 10,000 liters. Answer: 10,000 liters.
2 cubes - how many liters? Solution: 2 * 1000 = 2000 liters.
The answer is 2,000 liters.
20 cubic meters - how many liters? Solution: 20 * 1000 = 20,000 liters. The answer is 20,000 liters.
30 cubic meters - how many liters? Answer: 30,000 liters.
How many liters is 300 cubic meters? Answer: 300,000 liters.
5 cubes - how many liters? Answer: 5000 liters.
6 cubes - how many liters?
Answer: 6000 liters.
4 cubic meters are that many liters? The answer is 4000 liters.

That's why it's the simplest: answer the question: "1 cubic meter, how many liters?" - 1000 liters.

How many liters in a cubic meter?

And now we will answer questions about converting liters to cubic meters.

100 liters cubes? Solution: 100 * 0.001 = 0.1 c.u. meter. Answer: a cube of 0.1 meters.
200 liters cubes? Solution: 200 * 0.001 = 0.2 c.u. meter. Answer: 0.2 cubic meters.
3000 liters of cubes?
Answer 3 c.u. meter.
500 liters cubes? Answer: 0.5 cubic meters.
5000 liters of cubes? Answer: 5 cubes.
1000 liters of cubes? Answer: 1 m3
10,000 liters of cubes?
Answer: 10 c.u. m.
140 liters cubes? Answer: 0.14 meters of cubes.
1500 liters cubes? Answer: 1.5 cubic meters.

For ease of calculation, we suggest using our calculator to convert liters to cubes, but you can always do it yourself using a regular calculator to convert cubes to liters or liters to cubes.

l - liter. Quantity converter.

Liters to cubic meters

At present, problems related to mass, volume and material ratios are very common. It is enough to ask a person what weighs more: a kilogram or a kilogram of steel. Believe me, many people think that some are even mistaken.

It's important to be aware of water-related relationships so they don't look silly in decent company. It is often enough to perform simple arithmetic calculations. And the answers to seemingly complex questions just lie on the surface.

Let's take a closer look.

Determine quantity

Initially, it is necessary to determine the number of liters per cubic meter. As you know, one cubic meter is equal to 1000 cubic decimeters. It is known that each cubic decimeter can withstand one liter of water.

This is enough to find the simplest calculations - in a cubic meter - 1000 liters of water. In this case, there is a simple humidity without any additives and impurities.

What about mass?

In this case, 1 liter of pure water weighs exactly 1 kilogram. It turned out that a cubic meter of water weighs up to 1000 kilograms. It's hard to believe, but we're getting a ton.

Many hard materials do not even reach this figure. This can be explained by the unique properties of water. If you have a capacity of 5 cubic meters, and then fill it up, you should have 5,000 liters of water, 5,000 kilograms of liquid.

It seems that all unbiased indicators are involved, but in fact they are very large. For some wealthy people, such aquariums are everywhere. Imagine how much money they spend on fish conservation.

Unit converter

As you already understood, there are no problems in these tasks. You probably even took them to school, you just don't remember. These are elementary physical indicators.

Cubic meters of gas to liters, use the reverse rule: multiply the number of cubic meters of gas by 1000.
In the form of formulas, these simple rules can be written as follows:
Km³ \u003d C / 1000,
Cl \u003d Km³ * 1000,
Where:
Km³ is the number of cubic meters, and C is the number of liters.

As a rule, the volume of liquefied (under high or low temperature) gas enclosed in various containers (cylinders) is measured. In cubic meters, the volume of gas at atmospheric (or low) pressure is usually measured. To convert liters of liquefied gas into cubic meters of ordinary gas, in addition to the number of liters, it is necessary to know its pressure, temperature or density and mass. It should be noted that the cylinders, as a rule, are filled with liquefied gas by no more than 80%.
For approximate calculations, the following fact can be accepted: when one liter of liquefied gas () evaporates, 200 liters of gaseous gas are formed. Those. to convert the amount of liquefied gas in liters to cubic meters, use the following formula:
Km³ = C / 5
where Kl is the number of liters of liquefied gas.

What gas consumption will a household gas meter show if a standard domestic gas cylinder is passed through it?
Solution.
A standard "propane" gas cylinder has a volume of 50 liters. Household (kitchen) gas consists of butane. A standard charge contains 21 kg of this gas mixture. Since the molar masses of propane and butane are different, and the ratio of the amount of gases is usually unknown, then, using the above formula, we get:
Km³ \u003d 50/5 \u003d 10 cubic meters.

For compressed gases (do not confuse with liquefied), use the following approximate formula:
Km³ \u003d C * D / 1000,
where D is the gas pressure in atmospheres.

What volume of oxygen is contained in a standard cylinder at a pressure of 250 atmospheres?
Solution.

For the storage of gases such as nitrogen, argon, oxygen, 40-liter cylinders are used. Therefore, the volume of oxygen at normal (atmospheric) pressure will be:
Km³ \u003d 40 * 250 / 1000 \u003d 10 cubic meters.

Sources:

how to transport a gas bottle
Volume flow unit conversion

The volume of liquid is most commonly measured in liters. However, the "official" unit of measurement used, in particular, in water meters, is cubic meters. How do these units of measurement relate, and how to convert cubic meters to liters?

How does a liter compare to a cubic meter

A liter is a measure of capacity that is not included in the international SI system, but is used very widely. Moreover, it is a liter, and not an “abstract” cubic meter, that is the most common unit for measuring volumes in everyday life. For example, it is measured in liters:

capacity of various vessels intended for domestic use (buckets, pots, bottles, canisters, containers);
volume of car trunks,
the internal volume of refrigerators, freezers, microwave ovens and ovens;
capacity of city and tourist backpacks.

The "official" definition of a liter has changed several times. From the beginning of the 20th century until 1964, according to the decision of the General Conference on Weights and Measures, a liter was defined as the volume occupied by a kilogram of water. However, this definition turned out to be not very convenient: the ratio of the volume and mass of a liquid depends on many factors - from atmospheric pressure to air humidity. Therefore, experts abandoned the "binding" to the mass of water. And now a liter is a volume that exactly corresponds to a cubic decimeter- the volume of a cube, each edge of which has a length equal to exactly 10 centimeters, which corresponds to 0.1 meters.

How many liters in a cubic meter: conversion formula

So, a liter is equal to a cubic decimeter (dm ^ 3). In order to calculate the volume of a cube, you need to raise the length of the edge to the third power. A decimeter is equal to 0.1 meters. That is, a liter \u003d 0.1 m X 0.1 m X 0.1 m \u003d 0.001 m ^ 3 (one thousandth of a cubic meter).

Thus, one thousand liters "fit" in a cubic meter. And the formula for converting one unit to another will be very simple:

volume in cubic meters X 1000 = volume in liters.
volume in liters / 1000 = volume in cubic meters.

By the way, sometimes (very rarely, since large volumes of liquids or bulk mixtures are most often measured in “cubes”), the derivative “kiloliter” can be used to indicate a volume equal to a cubic meter, where the prefix kilo- just means a thousand.

How to convert cubic meters to liters and vice versa: calculation examples

Example 1On the packaging of plastic garbage bags it is indicated that their volume is 30 liters. What is the capacity of such a package in cubic meters?

A simple solution: 30/1000 = 0.03. The package volume is 0.03 (three hundredths) cubic meters.

Step by step, this solution can be written as follows: 30 liters = 30 dm ^ 3 = 30 X 0.1 m ^ 3 = 30 X 0.001 m ^ 3 = 0.03 m ^ 3.

Example 2 According to statistics, on average in Russia one person consumes 6 cubic meters of water per month. How many liters of water will an “average” family of three use per day, if we assume that there are 30 days in a month?

Calculation option: In a month, a family of 3 people will use 6 X 3 \u003d 18 cubic meters of water. We translate cubic meters into liters, multiplying by 1000 - and we end up with 18,000 liters per month. Divide by the number of days in a month: 18000 / 30 = 600. As a result, it turns out that the daily water consumption for the family as a whole will be 600 liters.

Example 3. The size of the bowl of the children's inflatable pool is 2 X 3 meters, the depth of the pool is 1 meter. How long will it take to fill it to the brim if water enters it at a rate of 30 liters per minute?

Calculation option: Calculate the capacity of the pool in cubic meters. 2 m X 3 m X 1 m = 6 m ^ 3. Convert to liters: 6 X 1000 \u003d 6000 liters. It remains to divide the volume in liters by the amount of water flowing per minute: 6000/30 = 200 minutes. Thus, the pool will be filled for 200 minutes (3 hours 20 minutes).

When performing construction work, for example, during flooring or repairing certain types of roofs, liquefied gas is used. When estimate documentation is compiled for the performance of work related to the use of gas, estimators sometimes face a problem: how to convert cubic meters to liters.

The fact is that liquefied gas is most often supplied in cylinders, the volume of which is measured in liters. In the estimate documentation, when calculating, the international system of units SI is most often used, in which a cubic meter is taken as a unit of volume. To calculate the number of gas cylinders and determine their cost, you should makeconvert m3 to liters.

Density is the quantitative value of the mass in kilograms placed in a cubic meter. It's very variable and depends on a lot of factors. The main one is temperature. So, the density of propane-butane can vary from 490 to 619 kg/m3.

What do you need to know?

Cubic meter (m³)- a unit of volume in the SI system. One cubic meter is equal to the volume of a cube with a side of 1 meter. This unit is derived from the SI unit of the meter, which is defined as "the distance traveled by light in vacuum in a time interval equal to 1⁄299792458 seconds".

Liter (l)- non-systemic metric unit of volume, equal to one cubic decimeter (dm³), 1000 cubic centimeters (cm³) or 10⁻³ cubic meter (m³).

1 cubic meter [m³] = 1000 liter [l]

We must immediately make a reservation that a simple calculation based on the fact that how many liters in a cube, does not work in our case. 1 m 3 contains 1000 liters of air, water or other substance in a normal state. However, the cylinders contain liquid gas, and it is there at high pressure and low temperature. For use, the substance must be brought into the gaseous phase, while its volume increases many times over.

How to make a calculation?

Under normal atmospheric conditions and a temperature of 15°C, the density of propane in the liquid state is 510 kg/m3, and that of butane is 580 kg/m3. Propane in a gaseous state at atmospheric pressure and a temperature of 15 ° C is 1.9 kg / m3, and butane - 2.55 kg / m3. Under normal atmospheric conditions and a temperature of 15°C, 0.392 m3 of gas is formed from 1 kg of liquid butane, and 0.526 m3 from 1 kg of propane.

Knowing the volume of a gas and its specific gravity, we can determine its mass. So, if the estimate indicates 27 m 3 of technical propane-butane, then multiplying 27 by 2.25 we find out that this volume weighs 60.27 kg. Now, knowing the density of liquefied gas, you can calculate its volume in liters or cubic decimeters. The density of propane-butane in the ratio 80/20 at a temperature of 10 C is 0.528 kg/dm 3 . Knowing the formula for the density of a substance (mass divided by volume), we can find the volume of 60.27 kg of gas. It is 60.27 kg / 0.528 kg / dm 3 \u003d 114.15 dm 3 or 114 liters.

How to convert propane-butane from kilograms to liters?

So, 27 cubic meters of gaseous propane-butane are equal to 114 liters of liquefied gas. To translate every time m 3 to liters do not use formulas, we derive the ratio: 27 m 3 \u003d 107 l, therefore 1 m 3 \u003d 4.2 l. Using reference data and simple formulas, you can easily make calculations that help in budgeting.

How to convert propane-butane from liters to kilograms?

Example: It is known that 100 liters of gas with a density of 0.53 are filled into a car. To calculate how many kilograms of gas, you need to multiply 100 by 0.53. You get 53 kg of gas.

How much m3 in a cylinder

Let's calculate the weight of the propane-butane mixture in the most common cylinder in construction: a volume of 50 with a maximum gas pressure of 1.6 MPa. The proportion of propane according to GOST 15860-84 must be at least 60% (note 1 to table 2):

50l \u003d 50dm3 \u003d 0.05m3;

0.05m3 (510 0.6 + 580 0.4) = 26.9kg

But due to the limitation of gas pressure of 1.6 MPa on the walls, more than 21 kg are not filled into a cylinder of this type.

Let's calculate the volume of the propane-butane mixture in the gaseous state:

21kg (0.526 0.6 + 0.392 0.4) = 9.93m3

Conclusion (for the case under consideration): 1 cylinder = 50l = 21kg = 9.93m3

Example: It is known that in a cylinder of 50 liters 21 kilograms of gas are filled, for which the test density is 0.567. To calculate liters, you need to divide 21 by 0.567. It turns out 37.04 liters of gas.

Technological parameters of liquefied gas:

	Propane	Butane
chemical name
Liquid phase density at 20°C, kg/liter
Gas density at 15°C kg/m3
Specific volume of gas (air = 1)
Boiling moment, °C